|
|
Post by libertycap on Feb 27, 2017 14:00:11 GMT -6
Anyone use nitrogen for their stouts? I'm prepping to buy a tank but I'm not sure what size I should grab. I've seen 40-60 cf referenced a lot.
|
|
dp Brewing Company
Administrator
Hangovers hurt....but good memories last forever!
Posts: 196 
Package Preference: Keg
Brewing Style: All Grain
|
Post by dp Brewing Company on Feb 27, 2017 14:10:30 GMT -6
LibertyCap,
Welcome to the site! When you get a chance please go over and give an intro.
I use a 75/25 Nitro mix on my stouts. I carb up using standard CO2 to about 1.0 vols then unhook that connection and hook up the nitro mix set at 30 psi (with stout tap). Your more than welcome to come check out my tank. I'm not 100% sure of the size. One cool thing about the mix is you can gauge how much gas you have left because the pressure will go down from tank to tank. Not like CO2 where it sits at 500 psi until empty then drops to 0.
|
|
